Foil cleaning.

Airborne dust, lint, fibres and other forms of dry unattached contamination are major causes of scrap and machine downtime in the conversion of today's high tech materials.

Substantial increases in yield are possible by introducing Teknek's range of XCH contact cleaning heads; a typical installation will have a R.O.I. of a few months, combined with a significant increase in production capacity.

Modern converting requires the removal of small particles before the critical process e.g. coating, laminating, sputtering, deposition and slitting.

With the introduction of ultrathin nanocoatings and optical based products, the 2/3 micron particle is now a major risk factor to the convertor.

• Single or double side cleaning
• modular design to suit the line requirements
• Side access of elastomer rollers and adhesive rollers
• easy maintenance

Features and benefits

Nanocleen technology available

• Single or double side cleaning
• Cleans what others leave behind
• Removes nano particles
• Leaves no trace
• Only silicone free contact cleaning solution available
• Anti Static
• Cleaning roller is static dissipating
• Clean room compatible
• Teknek proprietary Nanocleen adhesive coated on a filmic base
• Low air pressure – high grab air shaft technology designed for clean machines
• ensures no distortion of adhesive roll
• adhesive roll is centralised on shaft
• airshaft remains inflated for longer (no slipping) Pre sheeted adhesive rolls
• No knifes – safe to use
• Up to 30% reduction in scrap
• Tight even wind quality – no vibration Low contact pressure required to clean material
• Long life for elastomer rollers
• Gentle on sensitive films – no scratching
• Low tension required to operate machines Anti Static System after the rollers
• Stops dust being re-attracted to the web once it has been cleaned